I-CGT series high field strength drum magnet esisigxina isahluli semagnetic

I-CGT series high field strength drum esisigxina yemagnethi esisigxina yokwahlulahlula imagnethi Umfanekiso obonisiweyo

Inkcazo emfutshane:

I-CGT series high field strength roller permanent magnet separator yimveliso yobuchwepheshe obuphezulu eyenziwe ngononophelo ngabasebenzi besayensi nobuchwepheshe benkampani yethu. Le mveliso ifake isicelo selungelo elilodwa lomenzi wechiza lesizwe kwaye iphumelele uvavanyo lobuchwepheshe besizwe.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Isicelo:

Ukususa ukungcola okubuthathaka kwemagnethi kwizinto ezicoliweyo okanye ezirhabaxa. Ingasetyenziselwa ukucoca iiminerali ezingezizo ezesinyithi ezifana neeseramikhi, iglasi, izinto ezirhabaxa, kunye nokucoca amashishini eekhemikhali, ukutya, kunye namayeza. Ingasetyenziselwa ukukhethwa kwangaphambili kweeminerali ezibuthathaka zemagnethi ezifana ne-hematite kunye ne-limonite, kunye nokwahlulahlula i-manganese ore okomileyo.

Iimpawu zobugcisa:

◆Ukudibanisa okufanelekileyo kwedrama yemagnethi esisigxina kunye nedrama yemagnethi esisigxina kunokufezekisa isiphumo esingcono sokususa isinyithi.

◆Idrama isebenzisa uhlobo olutsha lwenkqubo yemagnethi ye-pole magnetic ehlawulelwayo, enamandla aphezulu e-magnetic field kunye nokufunxa okunamandla.

◆Inkqubo yemagnethi yedrama ingenziwa ngohlobo lokujika, nto leyo ephucula kakhulu izinga lokucoca.

◆Intsimi yemagnethi engaphezulu yedrama inokufikelela kwi-8000Gs.

◆Isantya esijikelezayo sedrama kunye ne-magnetic roller zilungiswa ngokuguqulwa kwamaza ukuze kuhlangatyezwane nobukhulu bezinto kunye neemfuno zemveliso.

◆Irola yemagnethi isebenzisa inkqubo yemagnethi edibeneyo yemagnethi, enamandla entsimi yemagnethi ayi-18000Gs kunye negradient ephezulu.

◆Ibhanti yokuhambisa esetyenziselwa i-magnetic roller yenziwe ngezinto ezikhethekileyo kwaye inokumelana nokuguguleka okuhle.

◆Inkqubo yokondla elawulekayo iqinisekisa ukufana kwezinto xa zihamba kwindawo yemagnethi.

◆Ii-oxide zemagnethi ezibuthathaka zingacocwa ngokuzenzekelayo, ukuqinisekisa ukusebenza kwexesha elide nokungenazingxaki.

◆Izibuko lokususa uthuli eligciniweyo lokukhupha uthuli oluphakathi, elihlangabezana neemfuno zokhuseleko lokusingqongileyo.

Iiparameter eziphambili zobugcisa:

Imodeli	Ububanzi× Ubude mm×mm		Isantya sokujikeleza r/min		Ubunzulu bokufakelwa kweMagnetic Gs		Inani leerola zemagnethi	Ubukhulu bebhantimm	Umthamo wokucubungula t/h	Amandla enjini kW
Imodeli	Igubu	Irola yemagnethi	Igubu	Irola yemagnethi	Igubu	Irola yemagnethi	Inani leerola zemagnethi	Ubukhulu bebhantimm	Umthamo wokucubungula t/h	Igubu	Irola yemagnethi
CGT-3/5			30	I-frequency eguquguqukayo ehlengahlengiswayo 17 ～ 82	≥ 4000	≥ 12000	1	0.1 ～ 2.0			0.37
2CGT-3/5	Φ300×500	Φ100×500					2		0.8 ～ 1.0	0.75	0.37
3CGT-3/5	Φ300×500	Φ100×500					3		0.8 ～ 1.0	0.75	0.55
4CGT-3/5							4				0.55×2
CGT-4/8							1				0.55
2CGT-4/8	Φ400×800	Φ100×800					2		1.2 ～ 2.0	1.10	0.75
3CGT-4/8	Φ400×800	Φ100×800					3		1.2 ～ 2.0	1.10	0.75
4CGT-4/8							4				0.75×2
CGT-5/10							1				0.55
2CGT-5/10	Φ500×1000	Φ100×1000					2		2.0 ～ 3.5	1.50	0.75
3CGT-5/10	Φ500×1000	Φ100×1000					3		2.0 ～ 3.5	1.50	0.75
4CGT-5/10							4				0.75×2
CGT-5/12							1				0.75
2CGT-5/12	Φ500×1200	Φ100×1200					2		4.0 ～ 7.0	2.20	1.10
3CGT-5/12	Φ500×1200	Φ100×1200					3		4.0 ～ 7.0	2.20	1.10
4CGT-5/12							4				1.10×2
CGT-6/15							1				0.75
2CGT-6/15	Φ600×1500	Φ100×1500					2		7.0 ～ 10.0	4.00	1.50
3CGT-6/15	Φ600×1500	Φ100×1500					3		7.0 ～ 10.0	4.00	1.50
4CGT-6/15							4				1.50×2